Equipment
Whatever the machine, if it is made in China, we can find, vet and commission it — examples below, not a fixed inventory.
We source against your brief and specification, worldwide. These are common categories and typical ranges, not listings of specific verified units — tell us the machine and the destination and we will quote it.
No matches. Tell us what you need instead — we source things that aren’t on this page too.
Block, profile and fabrication lines are what buyers in this category most often ask us to source and commission.
Forms and cures concrete into blocks, pavers and kerbstones.
Power
15–60 kW
Typical capacity
3,000–12,000 blocks/day
Typical lead time
45–75 days
Cuts, welds and finishes steel sections into doors and window frames.
Power
20–80 kW
Typical capacity
200–600 units/day
Typical lead time
60–90 days
Extrudes aluminium billet into window, door and structural profile.
Power
150–800 kW
Typical capacity
1,500–4,000 t/year
Typical lead time
90–150 days
Forms and fires clay or porcelain body into finished floor or wall tile.
Power
40–180 kW
Typical capacity
3,000–8,000 m²/day
Typical lead time
75–120 days
General-purpose production equipment, sourced for a new line or to add capacity to an existing one.
Cuts, drills and mills metal or plastic parts to specification from a digital design.
Power
15–75 kW
Typical capacity
Varies by part geometry
Typical lead time
45–90 days
Injects molten plastic into a mould to produce components at volume.
Power
20–150 kW
Typical capacity
500–5,000 shots/day
Typical lead time
60–90 days
Cuts and forms sheet metal to specification for fabrication and enclosures.
Power
10–40 kW
Typical capacity
Varies by part geometry
Typical lead time
45–75 days
Supplies compressed air for pneumatic tools, actuators and process equipment across a facility.
Power
15–250 kW
Typical capacity
1,000–15,000 L/min
Typical lead time
45–75 days
Washes, shreds and re-pelletises plastic waste into reusable raw-material granules.
Power
40–160 kW
Typical capacity
300–1,500 kg/hour
Typical lead time
75–110 days
Production lines for household products and daily consumables — the category with the tightest quality tolerances, because defects reach the end customer directly.
Moulds and finishes household plastic goods — containers, fixtures, general merchandise.
Power
30–120 kW
Typical capacity
2,000–10,000 pcs/day
Typical lead time
60–90 days
Converts kraft paper into corrugated board and dies it into finished cartons.
Power
40–200 kW
Typical capacity
15,000–40,000 m²/day
Typical lead time
75–120 days
Blows preforms into finished PET bottles for beverages and household liquids.
Power
20–100 kW
Typical capacity
3,000–15,000 bottles/hour
Typical lead time
60–100 days
Cuts fabric and assembles finished apparel at volume.
Power
5–20 kW
Typical capacity
500–2,000 pcs/day
Typical lead time
60–90 days
Converts jumbo paper reels into finished, packaged toilet rolls, kitchen towels or facial tissue.
Power
20–75 kW
Typical capacity
150–400 cartons/day
Typical lead time
60–100 days
Processing equipment for cotton, coffee, cocoa and other agricultural export commodities — where chain-of-custody and quality specification matter as much as the machine itself.
Separates cotton fibre from seed and cleans it ahead of baling.
Power
40–150 kW
Typical capacity
10–40 bales/hour
Typical lead time
75–110 days
Pulps, ferments, washes and dries coffee cherry or cocoa pod into export-grade beans.
Power
20–100 kW
Typical capacity
5–30 t/day
Typical lead time
75–120 days
Holds and moves temperature-sensitive commodities between production and port.
Power
20–100 kW
Typical capacity
200–2,000 m³ storage
Typical lead time
60–100 days
Post-harvest and food production lines — from raw grain and produce to a packaged, saleable product.
Hulls, polishes and grades grain into a finished, saleable product.
Power
30–150 kW
Typical capacity
20–150 t/day
Typical lead time
60–100 days
Grinds and pellets grain, oilseed meal and additives into livestock feed.
Power
15–90 kW
Typical capacity
1–10 t/hour
Typical lead time
60–90 days
Presses and refines oilseed into bottled cooking oil.
Power
30–200 kW
Typical capacity
10–100 t/day seed
Typical lead time
90–150 days
Peels, grates and extracts starch from cassava roots for food or industrial use.
Power
20–100 kW
Typical capacity
5–40 t/day roots
Typical lead time
75–110 days
Washes, sorts, cuts and packs fresh or frozen produce.
Power
15–75 kW
Typical capacity
2–20 t/day
Typical lead time
60–100 days
Flexible packaging, filling and print-finishing equipment for branded goods.
Prints multi-colour graphics onto flexible packaging film.
Power
15–60 kW
Typical capacity
100–300 m/min
Typical lead time
60–90 days
Forms, fills and seals flexible pouches and sachets.
Power
10–40 kW
Typical capacity
60–200 pouches/min
Typical lead time
60–90 days
Purifies, fills and seals drinking water into sachets or bottles for retail sale.
Power
15–60 kW
Typical capacity
1,500–3,000 sachets/hour
Typical lead time
60–90 days
Extrudes and heat-seals polythene film into shopping, refuse or packaging bags.
Power
15–50 kW
Typical capacity
80–250 kg film/day
Typical lead time
60–90 days
Fabric production equipment through to finishing — the machinery behind a garment or sack order.
Knits yarn into fabric for apparel and household textiles.
Power
5–15 kW per machine
Typical capacity
80–200 kg/day per machine
Typical lead time
45–75 days
Washes, distresses and finishes denim garments to the required shade and hand-feel.
Power
20–90 kW
Typical capacity
500–3,000 garments/day
Typical lead time
60–95 days
Weaves polypropylene tape into fabric and converts it into woven sacks and bags.
Power
40–150 kW
Typical capacity
5,000–20,000 bags/day
Typical lead time
75–110 days
A free 30-minute call. If it is not a fit, we say so.